Christian Müller

the neck is bolted on. The fretboard is glued on lightly with white glue to ensure that a potential disassembly can be done easier.

Before glueing I removed the finish with a scraper blade.

How I found the exact bridge position:

1. aligned the center to the neck
2. aligned the angle to the neck
3. aligned the distance to the 12. fret

The I scraped the finish away. It is crucial that this connection is done well because the string tension is very high (>100kg due to the 12 strings).

Glueing on the bridge.

Below the bridge is a clamping caul to protect the bars from beeing damaged by the clamps.